Productos

INTERBODY FUSION



Tlif Cage

M1 TLIF Cage

  • Transforaminal Lumbar Interbody Fusion (TLIF) system is designed to be used for open or minimally invasive surgery on lumbar region and it is manufactured from radiolucent PEEK material and Titanium.

M1 TLIF Cage

  • Footprint 27x10mm, 30×10 mm

  • Height 7, 8, 9, 10, 11, 12, 13 mm

  • Angles 0, 4 and 7 Degree

  • Material: PEEK and Titanium

     Reference No                                      Description

  • C122707PM1~C122713PM1              M1 TLIF PEEK CAGE 27x10mm (7mm to 13mm) 0 Deg.

  • C1227074M1~C1227134M1              M1 TLIF PEEK CAGE 27x10mm (7mm to 13mm) 4 Deg.

  • C1227074M1~C1227134M1              M1 TLIF PEEK CAGE 27x10mm (7mm to 13mm) 7 Deg.

  • C123007PM1~C123013PM1              M1 TLIF PEEK CAGE 30x10mm (7mm to 13mm) 0 Deg.

  • C1230074M1~C1230134M1              M1 TLIF PEEK CAGE 30x10mm (7mm to 13mm) 4 Deg.

  • C1230074M1~C1230134M1              M1 TLIF PEEK CAGE 30x10mm (7mm to 13mm) 7 Deg.

M2 TLIF Cage

  • Transforaminal Lumbar Interbody Fusion (TLIF) system is designed to be used for open or minimally invasive surgery on lumbar region and it is manufactured from radiolucent PEEK material and Titanium.
  • M2 TLIF Cage System includes a special thread design which blocks its movement after the placement.

M2 TLIF Cage

  • Footprint 27x10mm, 30×10 mm

  • Height 7, 8, 9, 10, 11, 12, 13 mm

  • Angles 0, 4 and 7 Degree

  • Material: PEEK and Titanium

     Reference No                                      Description 

  • C122707PM2~C122713PM2              M2 TLIF PEEK CAGE 27x10mm (7mm to 13mm) 0 Deg.

  • C1227074M2~C1227134M2              M2 TLIF PEEK CAGE 27x10mm (7mm to 13mm) 4 Deg.

  • C1227074M2~C1227134M2              M2 TLIF PEEK CAGE 27x10mm (7mm to 13mm) 7 Deg.

  • C123007PM2~C123013PM2              M2 TLIF PEEK CAGE 30x10mm (7mm to 13mm) 0 Deg.

  • C1230074M2~C1230134M2              M2 TLIF PEEK CAGE 30x10mm (7mm to 13mm) 4 Deg.

  • C1230074M2~C1230134M2              M2 TLIF PEEK CAGE 30x10mm (7mm to 13mm) 7 Deg.2




Plif Cage

PLIF Cage   

  • The Crea Interbody Fixation System implants are interbody fusion devices intended for use as an aid in spinal fixation. These bullet type tip implants are offered in a variety of widths, lengths, heights and variable angles (0, 4, 8, convex, lordotic) designed for anatomically diverse patients. 
  • The shape of serration of the cage on the superior and inferior  surface is designed for a firm fixation as ergonomically shaped anterior bullet edges and flat posterior edges are applied. The  radiopaque markers are embedded into the cage to allow  visualization of the cage’s position in radiographic images.

PLIF Cage

  • Footprint 25x10mm, 27×10 mm

  • Height 7, 8, 9, 10, 11, 12, 13 mm

  • Angles 0, 4, 8,  Convex, Lordotic

  • Material: PEEK and Titanium

     Reference No                                      Description

  • C0921070 ~ C0921130                      PLIF PEEK CAGE 25x10mm (7mm to 13mm) 0 Deg.

  • C0931070 ~ C0931130                      PLIF PEEK CAGE 27x10mm (7mm to 13mm) 0 Deg.

  • C0921074 ~ C0921134                      PLIF PEEK CAGE 25x10mm (7mm to 13mm) 4 Deg.

  • C0931074 ~ C0931134                      PLIF PEEK CAGE 27x10mm (7mm to 13mm) 4 Deg.

  • C0921078 ~ C0921138                      PLIF PEEK CAGE 25x10mm (7mm to 13mm) 8 Deg.

  • C0931078 ~ C0931138                      PLIF PEEK CAGE 27x10mm (7mm to 13mm) 8 Deg.

  • C092107C ~ C092113C                      PLIF PEEK CAGE 25x10mm (7mm to 13mm) Convex

  • C093107C ~ C093113C                      PLIF PEEK CAGE 27x10mm (7mm to 13mm) Convex

  • C092107L ~ C092113L                      PLIF PEEK CAGE 25x10mm (7mm to 13mm) Lordotic

  • C093107L ~ C093113L                      PLIF PEEK CAGE 27x10mm (7mm to 13mm) Lordotic

PLIF Cage (Expandable)   

  • The Crea PLIF Expandable Cages including a simple but efficient mechanism which facilitates the positioning and which provides a fitter insertion to the region. A controlled expansion decreases the effiiency of the indirect decompression during thhe restoration of the disc lenght. The expansion without space for the cage also optimizes the prevention of cage shift.

PLIF Cage (Expandable)

  • Footprint 25×10 mm

  • Height 7, 8, 9, 10, 11, 12, 13 mm

  • Angles 0, 4, 8, Lordotic

  • Material: PEEK and Titanium

     Reference No                           Description

  • C1121070 ~ C1121130           PLIF PEEK EXPANDABLE CAGE 25x10mm (7mm to 13mm) 0 Deg

  • C1121074 ~ C1121134           PLIF PEEK EXPANDABLE CAGE 25x10mm (7mm to 13mm) 4 Deg

  • C1121078 ~ C1121138           PLIF PEEK EXPANDABLE CAGE 25x10mm (7mm to 13mm) 8 Deg

  • C112107L ~ C112113L           PLIF PEEK EXPANDABLE CAGE 25x10mm (7mm to 13mm) Lordotic



Alif Cage

     ALIF Cage   

  • Crea ALIF Cage implant is manufactured from PEEK material which is a thermoplastic solution compatible with the body and which causes no artifact and compatible with MRI for in-vivo applications.
  •  The ALIF Cage can make solid interbody fusion with optimized anatomical position. The ALIF Cage design offers a large contact area, optimizing vertebral body support while minimizing risk of subsidence.

    ALIF Cage

  • Footprint 26x30mm, 28×34 mm, 30×36 mm

  • Height 10, 12, 14, 16 mm

  • Angles 7 and 14 Degree

  • Material: PEEK 

     Reference No                                    Description

  • C152630107 ~ C152630147            ALIF PEEK CAGE 26×30 mm (H:10/12/14/16 mm)  7 Degree

  • C152834107 ~ C152834167            ALIF PEEK CAGE 28×34 mm (H:10/12/14/16 mm)  7 Degree

  • C153036107 ~ C153036167            ALIF PEEK CAGE 30×36 mm (H:10/12/14/16 mm)  7 Degree

  • C1526301014 ~ C1526301614        ALIF PEEK CAGE 26×30 mm (H:10/12/14/16 mm)  14 Degree

  • C1528341014 ~ C1528341614        ALIF PEEK CAGE 28×34 mm (H:10/12/14/16 mm)  14 Degree

  • C1530361014 ~ C1530361614        ALIF PEEK CAGE 30×36 mm (H:10/12/14/16 mm)  14 Degree

     ALIF Cage  (Stand-Alone Hybrid)  

  • Crea ALIF Stand Alone Hybrid cage is a stand-alone anterior lumbar interbody device designed to combine the functionality and benefits of a lumbar interbody spacer and an interior lumbar plate.
  • The wide graft chamber, optimises the contact between graft and the vertebral endplates enhancing the quality of the fusion. 
  •  42º screw angle resist expulsion and the midline screw placement with ±10º angulation aids optimal access and solid fixation.

    ALIF Cage

  • Footprint 26x30mm, 28×34 mm, 30×36 mm

  • Height 10, 12, 14, 16 mm

  • Angles 7 and 14 Degree

  • Material: PEEK and TITANIUM

     Reference No                                       Description

  • C162630107H ~ C162630167H          ALIF STAND-ALONE HYBRID CAGE 26x30mm H:10/12/14/16  7 Deg.

  • C162834107H ~ C162834167H          ALIF STAND-ALONE HYBRID CAGE 28x34mm H:10/12/14/16  7 Deg.

  • C163036107H ~ C163036167H          ALIF STAND-ALONE HYBRID CAGE 28x34mm H:10/12/14/16  7 Deg.

  • C1630361014H ~ C1630361614H      ALIF STAND-ALONE HYBRID CAGE 28x34mm H:10/12/14/16  14 Deg.

  • C1628341014H ~ C1628341614H      ALIF STAND-ALONE HYBRID CAGE 28x34mm H:10/12/14/16  14 Deg.

  • C1626301014H ~ C1626301614H      ALIF STAND-ALONE HYBRID CAGE 26x30mm H:10/12/14/16  14 Deg.

     Reference No                Description

  • C16L005525                 ALIF STAND-ALONE CAGE LOCKING SCREW 5.5×25 mm

  • C16L005530                 ALIF STAND-ALONE CAGE LOCKING SCREW 5.5×30 mm

  • C16L005535                 ALIF STAND-ALONE CAGE LOCKING SCREW 5.5×35 mm

  • C16L006525                 ALIF STAND-ALONE CAGE LOCKING SCREW 6.0×25 mm

  • C16L006530                 ALIF STAND-ALONE CAGE LOCKING SCREW 6.0×30 mm

  • C16L006535                 ALIF STAND-ALONE CAGE LOCKING SCREW 6.0×35 mm

ANTERIOR CERVICAL



ACIF Cage

     ACIF Cage 

  • Crea ACIF Cage is manufactured from PEEK.  
  • It has a wide measurement range designed according to heights and footprints.
  • It has big graft holes in order to provide maximum fusion.
  • The functional and reliable application sets which facilitates the application are designed and manufactured to facilitate the surgical application and also the comfort of the patients.

    ACIF Cage

  • Footprint 12×14 mm and 14×16 mm

  • Height 4, 5, 6, 7, 8 mm

  • Angles 0 Degree and Lordotic 

  • Material: PEEK and TITANIUM

     Reference No                                       Description

  • C01244P ~ C01248P              CERVICAL PEEK CAGE P 12×14  H: 4/5/6/7/8 mm

  • C01464P ~ C01268P              CERVICAL PEEK CAGE P 14×16  H: 4/5/6/7/8 mm

  • C01244L ~ C01248L              CERVICAL PEEK CAGE P 12×14  H: 4/5/6/7/8 mm

  • C01464L ~ C01468L              CERVICAL PEEK CAGE P 14×16  H: 4/5/6/7/8 mm

     ACIF Cage (Expandable)   

  • Enabling for level adjustment
  • Strong grip and easy remove
  • Full compliance for posterior region
  • Markers for X RAY

    ACIF Cage (Expandable)

  • Footprint 12×14 and 14×16 mm

  • Height 4, 5, 6, 7 , 8

  • Angles – Lordotic

  • Material: PEEK and TITANIUM

     Reference No                                    Description

  • C03244L ~ C03248L           EXPANDABLE CERVICAL PEEK CAGE L 12x14mm 4 to 8 mm

  • C03464L ~ C03468L           EXPANDABLE CERVICAL PEEK CAGE L 14x16mm 4 to 8 mm

     ACIF Cage (Bladed)

  • Crea ACIF Cage is manufactured from PEEK anf has got a two sided blade. Blades for a more reliable holding between the endplates. 
  • It has a wide measurement range designed according to heights and footprints.
  • It has big graft holes in order to provide maximum fusion.
  • The functional and reliable application sets which facilitates the application are designed and manufactured to facilitate the surgical application and also the comfort of the patients.

    ACIF Cage (Bladed)

  • Footprint 12×14 mm and 14×16 mm

  • Height 4, 5, 6, 7, 8 mm

  • Angles : Lordotic 

  • Material:  PEEK and TITANIUM

     Reference No                                       Description

  • C04244L ~ C04248L              BLADED CERVICAL PEEK CAGE L 12×14  H: 4/5/6/7/8 mm

  • C04464L ~ C04468L              BLADED CERVICAL PEEK CAGE L 14×16  H: 4/5/6/7/8 mm

     ACIF Cage (Expandable Bladed)   

  • Crea ACIF Expandable Bladed cages enabling for level adjustment and blades for a more reliable holding between endplates
  • Strong grip and easy remove
  • Toothed inferior and superior surfaces
  • Full compliance for posterior region
  • Markers for X RAY

    ACIF Cage (Expandable Bladed)

  • Footprint 12×14 and 14×16 mm

  • Height 4, 5, 6, 7 , 8

  • Angles – Lordotic

  • Material: PEEK and TITANIUM

     Reference No                                    Description

  • C04E244 ~ C244E248              EXPANDABLE BLADED CERVICAL CAGE L 12×14  H :4/5/6/7/8 mm

  • C04E464 ~ C244E468              EXPANDABLE BLADED CERVICAL CAGE L 14×16  H :4/5/6/7/8 mm

     ACIF Cage (Stand-Alone)

  • The CREA ACIF Stand-Alone Cage has optimized screw angulation (40º Cephalad/Caudal, 10º Medial convergence)
  • Toothed Inferior and Superior Surface
  • Large Graft Space
  • Full Compliance to Posterior Surfaces

    ACIF Cage (Bladed)

  • Footprint 12×14 mm and 14×16 mm

  • Height  5, 6, 7, 8, 9 mm

  • Angles : Lordotic 

  • Material:  PEEK and TITANIUM

     Reference No                             Description

  • C05245L ~ C05249L                  STAND-ALONE CERVICAL PEEK CAGE L 12×14 mm H: 5/6/7/8/9 mm

  • C05465L ~ C05469L                  STAND-ALONE CERVICAL PEEK CAGE L 12×14 mm H: 5/6/7/8/9 mm

     

     Reference No                                       Description

  • C083512 ~ C083520          STAND ALONE CAGE SCREW Ø3.5 L: 12/14/16/18/20 mm

  • C084012 ~ C084020          STAND ALONE CAGE SCREW Ø4.0 L: 12/14/16/18/20 mm

TRANSPEDICULAR FIXATION



Polyaxial and Polyaxial Reduction Screws

     Polyaxial and Reduction Polyaxial Screw

  • All screws are designed and manufactured as double theraded. This specification cause the screw to move rapidly, Provides for the patient to have decreased bone loss during surgery and provides a tight coherence for the screw and minimize the pull-out risk.

  • Setscrews has torx design.

  • Screw dimension increases in parallel to the screw diameter.

   Polyaxial and Reduction Polyaxial Screw

  • Ø4.0 mm to 7.5mm

  • Lenght : 25mm ~ 55 

  • High and Low profile alternatives

     Reference No                           Description

  • C174025 ~ C174045               POLYAXIAL SCREW 4.0×25 ~ 45 mm

  • C174525 ~ C174545               POLYAXIAL SCREW 4.5×25 ~ 45 mm

  • C175025 ~ C175055               POLYAXIAL SCREW 5.0×25 ~ 55 mm

  • C175525 ~ C175555               POLYAXIAL SCREW 5.5×25 ~ 55 mm

  • C176025 ~ C176055               POLYAXIAL SCREW 6.0×25 ~ 55 mm

  • C176525 ~ C176555               POLYAXIAL SCREW 6.5×25 ~ 55 mm

  • C177030 ~ C177055               POLYAXIAL SCREW 7.0×30 ~ 55 mm

  • C177530 ~ C177555               POLYAXIAL SCREW 7.5×30 ~ 55 mm

  • C1700T30                                SETSCREW T30

  • C1700T40                                SETSCREW T40

 

     Reference No                           Description

  • C194025 ~ C194045               POLYAXIAL REDUCTION SCREW 4.0×25 ~ 45 mm

  • C194525 ~ C194545               POLYAXIAL REDUCTION SCREW 4.5×25 ~ 45 mm

  • C195030 ~ C195055               POLYAXIAL REDUCTION SCREW 5.0×30 ~ 55 mm

  • C195530 ~ C195555               POLYAXIAL REDUCTION SCREW 5.5×30 ~ 55 mm

  • C196030 ~ C196055               POLYAXIAL REDUCTION SCREW 6.0×25 ~ 55 mm

  • C196530 ~ C196555               POLYAXIAL REDUCTION SCREW 6.5×25 ~ 55 mm

  • C197030 ~ C197055               POLYAXIAL REDUCTION SCREW 7.0×30 ~ 55 mm

  • C197530 ~ C197555               POLYAXIAL REDUCTION SCREW 7.5×30 ~ 55 mm

  • C1700T30                                SETSCREW T30

  • C1700T40                                SETSCREW T40



Monoaxial Screws and Cannulated Screws

 Monoaxial and Reduction Monoaxial Screw

  • Monoaxial screws are designed and manufactured as double theraded.

 Cannulated Monoaxial and Polyaxial Screws
  • Cannulated screws (Monoaxial/Monoaxial Reduction/Polyaxial Polyaxial Reduction) has 2 mm cannule. For easy graft insertation also has got a hole 10 mm before end of screw.

 

   Monoaxial and Reduction Monoaxial Screw

  • Ø4.5 mm to 7.5mm (+1 mm increament)

  • Lenght : 25mm ~ 55 

  • Low Profile

   Cannulated Screws

  • Ø6.5 mm to 7.5mm (+1 mm increament)

  • Lenght : 30 mm ~ 55 

  • High Profile and Low Profile

  • Ø2.0 mm cannule

     Reference No                           Description

  • C184525 ~ C184545          MONOAXIAL SCREW 4.5X25 ~ 45 mm

  • C185530 ~ C185555          MONOAXIAL SCREW 5.5X30 ~ 55 mm

  • C186530 ~ C186555          MONOAXIAL SCREW 6.5X30 ~ 55 mm

  • C187530 ~ C187555          MONOAXIAL SCREW 7.5X30 ~ 55 mm

  • C204525 ~ C204545          MONOAXIAL REDUCTION SCREW 4.5X25 ~ 45 mm

  • C205530 ~ C205555          MONOAXIAL REDUCTION SCREW 5.5X30 ~ 55 mm

  • C206530 ~ C206555          MONOAXIAL REDUCTION SCREW 6.5X30 ~ 55 mm

  • C207530 ~ C207555          MONOAXIAL REDUCTION SCREW 7.5X30 ~ 55 mm

  • C1700T30                                SETSCREW T30

  • C1700T40                                SETSCREW T40

 

     Reference No                           Description

  • C216530 ~ C196555               POLYAXIAL CANNULATED SCREW 6.5×25 ~ 55 mm

  • C217030 ~ C197055               POLYAXIAL CANNULATED SCREW 7.0×30 ~ 55 mm

  • C236530 ~ C236555               POLYAXIAL REDUCTION CANNULATED SCREW 6.5×25 ~ 55 mm

  • C237030 ~ C237055               POLYAXIAL REDUCTION CANNULATED SCREW 7.0×30 ~ 55 mm

  • C226530 ~ C226555               MONOAXIAL CANNULATED SCREW 6.5×25 ~ 55 mm

  • C227030 ~ C227055               MONOAXIAL CANNULATED SCREW 7.0×30 ~ 55 mm

  • C246530 ~ C246555               MONOAXIAL REDUCTION CANNULATED SCREW 6.5×25 ~ 55 mm

  • C247030 ~ C247055               MONOAXIAL REDUCTION CANNULATED SCREW 7.0×30 ~ 55 mm

  • C1700T30                                SETSCREW T30

  • C1700T40                                SETSCREW T40



Cervical Polyaxial Screw

    Cervical Polyaxial Screws

  • All screws are designed and manufactured mono theraded. 

  • Setscrews has torx design.

  • Screw dimension increases in parallel to the screw diameter.

   Cervical Polyaxial Screw

  • Ø 3.5 mm and  4.0 mm

  • Lenght : 10 to 30 mm (+2 mm increament)

     Reference No                           Description

  • C263510 ~ C263530               CERVICAL POLYAXIAL SCREW 3.5×10 ~ 30 mm

  • C264010 ~ C264030               CERVICAL POLYAXIAL SCREW 4.0×10 ~ 30 mm

  • C1700T20                                SETSCREW T20



Iliac Screw

 

 Iliac Screws (Monoaxial and Polyaxial)

  • Monoaxial and polyaxial types variable.

  • All screws are designed and manufactured as double theraded.

 

   Iliac Screws (Monoaxial and Polyaxial)

  • Ø8.0 mm to 10 mm (+1 mm increament)

  • Lenght 70-80-90 and 100 mm

 

     Reference No                                  Description

  • CM258070 ~ CM2580100              ILIAC MONOAXIAL SCREW Ø8.0×70 ~ 100 mm (10mm increament)

  • CM259070 ~ CM2590100              ILIAC MONOAXIAL SCREW Ø9.0×70 ~ 100 mm (10mm increament)

  • CM2510070 ~ CM25100100          ILIAC MONOAXIAL SCREW Ø10.0×70 ~ 100 mm (10mm increament)

  • C1700T30                                       SETSCREW T30

 

 Reference No                                  Description

  • C258070 ~ C2580100              ILIAC SCREW Ø8.0×70 ~ 100 mm (10mm increament)

  • C259070 ~ C2590100              ILIAC SCREW Ø9.0×70 ~ 100 mm (10mm increament)

  • C2510070 ~ C25100100          ILIAC SCREW Ø10.0×70 ~ 100 mm (10mm increament)

  • C1700T30                                 SETSCREW T30



Rod

 

 Rods

  • All rods made from titanium and Peek (Peek rod).

  • Various shape, size and diameter. 

 

   Rod

  • Ø3.5 mm for cervical use (30-60-90-120 and 150 mm)

  • Ø5.5 mm and Ø6.0 mm for transpedicular fixation (40mm to 500 mm)

  • Ø5.5 mm and Ø6.0 peek rod (30 to 130 mm)

 

     Reference No                                  Description

  • C273530 ~ C2735150                    Ø3.5 mm TITANIUM ROD (30/60/90/120/150)

  • C3035240                                       Ø3.5 x 240 mm CURVED ROD FOR OCCIPITAL PLATE 

  • C275540 ~ C2755500                    Ø5.5 mm TITANIUM ROD 40 mm ~ 500 mm

  • C276040 ~ C2760500                    Ø6.0 mm TITANIUM ROD 40 mm ~ 500 mm

  • C28P5030 ~ C28P5130                  Ø5.5 mm PEEK ROD 30 mm ~ 130 mm

  • C28P6030 ~ C28P6130                  Ø6.0 mm PEEK ROD 30 mm ~ 130 mm

  • C295540 ~ C2955200                    Ø5.5 mm CURVED ROD 40 mm ~ 200 mm

  • C296040 ~ C2960200                    Ø6.0 mm CURVED ROD 40 mm ~ 200 mm

  • C285560 ~ C2855200                    Ø5.5 mm DYNAMIC ROD 40 mm ~ 200 mm

  • C286060 ~ C2860200                    Ø6.0 mm DYNAMIC ROD 40 mm ~ 200 mm



Transvers Connectors

 

 Transvers Connectors

  • All connectors made from titanium.

  • Various shape, size and diameter for all needs.

 

   Transvers Connectors

  • Ø3.5 mm for cervical use 

  • Ø5.5 mm and Ø6.0 mm for transpedicular fixation

  • Rigid and Multiaxial types

 

     Reference No                               Description

  • C316005M1                                 Ø5.5 mm TRANSVERS CONNECTOR M1 HOOK

  • C316006M1                                 Ø6.0 mm TRANSVERS CONNECTOR M1 HOOK

  • C316030M1 ~ C316090M1         TRANSVERS CONNECTOR M1 40mm ~ 90 mm

  • C316005M2                                  Ø5.5 mm TRANSVERS CONNECTOR M2 CLIPS

  • C316006M2                                  Ø6.0 mm TRANSVERS CONNECTOR M2 CLIPS

  • C316030M2 ~ C316090M2          TRANSVERS CONNECTOR M1 40mm ~ 90 mm

  • C325530 ~ C325560                    Ø5.5 mm MULTIAXIAL TRANSVERS CONNECTOR **

  • C326030 ~ C326060                    Ø6.0 mm MULTIAXIAL TRANSVERS CONNECTOR **

** 32/40 mm – 40/50 mm – 60/70 mm – 70/80 mm

     Reference No                               Description

  • C330000                                       CERVICAL TRANSVERS CONNECTOR HOOK 

  • C333530 ~ C333570                    CERVICAL TRANSVERS CONNECTOR 30 mm ~ 70 mm



Lateral Connectors

 

 Lateral Connectors

  • All connectors made from titanium.

  • Various shape, size and diameter. 

 

   Lateral Connectors

  • Ø5.5 mm and Ø6.0 mm alternatives

  • 20/30/40/50 and 60 mm lenghts

  • Torx 20 Setscrew

 

     Reference No                                 Description

  • C3655020 ~ C3655060                 Ø5.5 LATERAL CONNECTOR 20mm ~ 60 mm 

  • C3660020 ~ C3660060                 Ø6.0 LATERAL CONNECTOR 20mm ~ 60 mm 

  • C36O55020 ~ C36O55060            Ø5.5 LATERAL CONNECTOR 20mm ~ 60 mm 

  • C36O60020 ~ C36O60060            Ø6.0 LATERAL CONNECTOR 20mm ~ 60 mm 



Axial/Parallel Connectors

 

 Axial/Parallel Connectors

  • All axial connector made from titanium.

  • Various shape, size and diameter

  • Torx20 Setscrew 

   Axial/Parallel Connectors

  • Ø3.5/Ø5.5/ Ø6.0 mm alternatives

  • Short/long – Open/Close alternatives

  • Torx 20 Setscrew

 

     Reference No                                 Description

  • C385535 ~  C386060           PARALLEL SHORT CONNECTOR (3.5/5.5-5.0/6.0-5.0/5.5-5.5/6.0-6.0/6.0)

  • C39553508                           PARALLEL LONG CONNECTOR 3.5/5.5 D:8 mm

  • C39555512                           PARALLEL LONG CONNECTOR 5.5/5.5 D:12 mm

  • C39555510                           PARALLEL LONG CONNECTOR 5.5/5.5 D:10 mm

  • C39555508                           PARALLEL LONG CONNECTOR 5.5/5.5 D:8 mm

  • C39606012                           PARALLEL LONG CONNECTOR 6.0/6.0 D:12 mm

  • C39606010                           PARALLEL LONG CONNECTOR 6.0/6.0 D:10 mm

  • C39606008                           PARALLEL LONG CONNECTOR 6.0/6.0 D:8 mm

  • C39POSC                               PARALLEL OPEN TYPE SMALL CONNECTOR

  • C39POMC                               PARALLEL OPEN TYPE MEDIUM CONNECTOR

  • C39POLC                               PARALLEL OPEN TYPE LARGE CONNECTOR

     Reference No                    Description

  • C39ASC                             AXIAL SHORT CONNECTOR

  • C39ALC                             AXIAL LONG CONNECTOR


Occipital Plate

 

 Occipital Plate

  • All Occipital plate and screws made from titanium.

  • Various shape, size and diameter

   Occipital Plates and Screws

  • Small, Medium and Large Plate alternatives

  • Ø4.5 and Ø5.5 screw alternatives

  • 6 mm to 16 mm screw lenghts

     Reference No                 Description

  • C343000                         OCCIPITAL PLATE SMALL

  • C344000                         OCCIPITAL PLATE MEDIUM

  • C345000                         OCCIPITAL PLATE LARGE

     Reference No                    Description

  • C354506 ~ C354516       OCCIPITAL PLATE SCREW Ø4.5 x 06 mm ~ 16 mm

  • C355506 ~ C355516       OCCIPITAL PLATE SCREW Ø5.5 x 06 mm ~ 16 mm


Hooks

 

 Hooks

  • All Hooks made from titanium.

  • Laminar,Pedicular and Offset types

   Hooks

  • W : 4, 5, 7 and 8 mm 

  • L : 4, 5, 6, 7, and 9 mm

  • Ø5.5 and Ø6.0 mm rod alternatives

     Reference No                            Description

  • C37CLH45 ~ C37CLH47            CERVICAL LAMINAR HOOK ( 4×5 / 4×6 / 4×7 mm)

  • C37LH54 ~ C37LH57                LAMINAR HOOK (5×4 / 5×5 / 5×6 / 5×7 mm)

  • C37LH74 ~ C37LH77                LAMINAR HOOK (7×4 / 7×5 / 7×6 / 7×7 mm)

  • C37PH84 ~ C37PH87                PEDICULAR HOOK (8×4 / 8×5 / 8×6 / 8×7 mm)


Anterior Cervical Plates

 

 Anterior Cervical Plate and Locking Screw

  • All Cervical plates and screws are made from titanium.

  • Locking screw 

   Anterior Cervical Plate and Locking Screw

  • W : 16 mm 

  • L : 21 ~ 57 mm

  • Thickness 2 mm

     Reference No                            Description

  • C341621 ~ C341657                  ANTERIOR CERVICAL PLATE 21 mm ~ 57 mm 

  • C35P3514 ~ C35P3520             ANTERIOR CERVICAL PLATE LOCKING SCREW 14 mm ~ 20 mm